Philips SENSEO® Latte Duo Kaffeepadmaschine - Manual (Page 10)

10
9
Insert the connector of the milk tube into the
milk spout (1). Place the other end of the milk
tube in a milk carton or jar (2).
E Tip:
Use fresh chilled milk. We recommend semi
skimmed fresh cow’s milk to get the best milk
froth.
D Note:
To prevent steam from coming out of the milk
spout, make sure there is enough milk in the
carton or jar.
10
Place one cup or two cups under the spout
openings. You can adjust the drip tray or
remove the drip tray to be able to place
higher cups.
11
Press the recipe button of your choice to select
the desired coffee speciality. You can choose
between cappuccino, café latte, latte macchiato
or warm milk only. Press the recipe button
once for one cup or twice for two cups.
6
Place 1 coffee pod in the 1-cup pod holder
q (1) or place 2 coffee pods in the 2-cup
pod holder qq (2). Place the pod or pods
properly in the centre of the pod holder, with
the convex side pointing downwards. Press
the pod or pods lightly into the pod holder.
D Note:
Make sure the coffee in the pod or pods is
evenly distributed.
C Caution:
Never put normal ground coffee or use torn
pods in the SENSEO ® machine, as this causes
it to become blocked.
7
Close the lid and lock the lever.
8
Slide the milk spout onto the machine. Make
sure you attach the milk spout by sliding it
over the guiding rails on the coffee spout. You
hear a click sound when the spout is attached
properly.