Baracoda Barcode Reader - Manual (Page 21)

DualRunners – Communication Protocol v1.3 - 21 -
Data Capture
for Workforce
in Motion
{Bit 0: Success}
Code ID 0xF8-0xF9
Description Get stored captured data count
Payload None
Response 2 bytes:
{Stored captured data (barcodes or TagID) count [15:8]}
{Stored captured data (barcodes or TagID) count [7:0]}
Code ID 0xFC-0xFD
Description Erase stored captured data (ie: barcodes or TagID)
Payload None
Response 1 byte:
{(Bit 0:Success)}
Code ID 0xFE-0xFF
Description Barcode decoder Commands
Payload {header} {type} {size} “Parameters”
Response If the device responds:
{Code ID}{length}{header}{type} {response size} “Response”
Else: {0}
Remarks Only available if Scan engine is 1D version
Barcode decoder specific commands from the Platform2 Decoder communication protocol are to be
framed within the payload of this message.