Baracoda Barcode Reader - Manual (Page 14)

DualRunners – Communication Protocol v1.3 - 14 -
Data Capture
for Workforce
in Motion
Code ID 0x92-0x93
Description Get Beeps mode
Payload
Response 1 byte:
{(Bit 0: Beep level 0=low, 1=high)
(Bit 1: Read beep)
(Bit 2: ACK beep)}
Code ID 0x94-0x95
Description Set Beeps mode
Payload 1 byte:
{(Bit 0: Beep level; 0=low, 1=high)
(Bit 1: Read beep)
(Bit 2: ACK beep)
(Bit 7 = 0: ACK beep config select, =1: ACK beep config deselect)
(Bit 6 = 0: Read beep config select, =1: Read beep config deselect)
(Bit 5 = 0: Beep level config select, =1: Beep level config deselect)}}
Response 1 byte:
{(Bit 0: Success)}