Burley Nomad - Manual (Page 4)

4
Burley Nomad Owner’s Instruction and Safety Manual
Once the wheels are fully seated in the hollow axle, the quick-release laver should
be positioned so that it is aimed to the rear of the trailer in the “CLOSED” position
(the lever is marked for OPEN or CLOSED positions). The wheel quick-release/axle
assembly comes preadjusted from Burley.
Make sure wheels are held securely, with wheel shaft fully inserted
into the hollow axle. You should not be able to rock or shift wheels.
Improperly installed wheels can fall off, causing an accident or
serious injury.
With wheels mounted, both refl ectors must face outward. Check to
see that both refl ectors have been installed correctly. Incorrectly
installed refl ectors can reduce visibility at night and cause an
accident or serious injury.
III. Install Rear Refl ectors
In the hardware bag, you’ll fi nd the parts needed to install the rear refl ectors:
(2) Refl ector brack et
(2) Self-tapping Phillips screw, bracket
(2) Rear refl ector, red
(2) Self-tapping slotted screw, refl ector
Wheel axle assembly inserts into hollow trailer axle