beautypg.com

Burley 09 Encore User Manual

Installation instructions for ‘09 d’lite, Encore, And solo

background image

Contents:

(1) Burley Owner’s Instruction and Safety Manual
(1) Hitch
(1) Clear light with batteries included
(1) Red light with batteries included
(2) Phillip Pan screws
(2) Brackets for lights
(1) Wheel guard assembly:

(2) wheel guards
(4) screws
(1) 5mm hex key wrench

Tools Required: Phillips screwdriver

4mm hex wrench

10mm or open end wrench

Note:

Consult your Burley Owner’s

Instruction and Safety Manual for

wheel guard and hitch installation

instructions.

Roll Bar Installation

1. If handle bar receivers are already

installed, loosen and remove handle bar

knobs and outer handle bar receivers.

Figure 1

2. Using wrench, loosen and remove

lock nuts and screws from handle bar

receivers.

3. From trailer front, slide roll bar into upper

handle bar receivers, with curved front

extending above trailer body.

4. Match holes in roll bar and inner handle

bar receivers, re-install screws and

tighten lock nuts.

5. Replace outer handle bar receivers and

tighten knobs.

Installation Instructions

for ‘09 d’lite

, Encore

®

and Solo

(Euro) Child Trailers

Contents:

(1) Burley Owner’s Instruction and Safety Manual
(1) Hitch
(1) Clear light with batteries included
(1) Red light with batteries included
(2) Phillip Pan screws
(2) Brackets for lights
(1) Wheel guard assembly:

(2) wheel guards
(4) screws
(1) 5mm hex key wrench

Tools Required: Phillips screwdriver

4mm hex wrench

10mm or open end wrench

Note:

Consult your Burley Owner’s

Instruction and Safety Manual for

wheel guard and hitch installation

instructions.

Roll Bar Installation

1. If handle bar receivers are already

installed, loosen and remove handle bar

knobs and outer handle bar receivers.

Figure 1

2. Using wrench, loosen and remove

lock nuts and screws from handle bar

receivers.

3. From trailer front, slide roll bar into upper

handle bar receivers, with curved front

extending above trailer body.

4. Match holes in roll bar and inner handle

bar receivers, re-install screws and

tighten lock nuts.

5. Replace outer handle bar receivers and

tighten knobs.

Installation Instructions

for ‘09 d’lite

, Encore

®

and Solo

(Euro) Child Trailers

Figure 1: Roll Bar Installation

Lock Nuts

rear Assembly

Frame

roll Bar

Fr

on

t o

f T

ra

ile

r

inner Handle bar

receiver

Outer Handle bar

receiver

Handle bar

Knob

Screws

Figure 1: Roll Bar Installation

Lock Nuts

rear Assembly

Frame

roll Bar

Fr

on

t o

f T

ra

ile

r

inner Handle bar

receiver

Outer Handle bar

receiver

Handle bar

Knob

Screws

This manual is related to the following products: