Burley Nomad - Manual (Page 11)

11
Burley Nomad Owner’s Instruction and Safety Manual
Make sure that the cone is wedged se cure ly into the stays. The knob should be fi nger-
tight; do not overtighten. The hitch should not move, but should al low the bicycle
complete move ment, in clud ing lying it down on the ground. It should clear any
racks, bags, or fi t tings you have on your bicycle. If there is any interference, contact
your Burley dealer.
.
IMPORTANT: Remove trailer from your bicycle when it’s not in use to
pre vent deforming the plastic hitch.
Do not operate trailer without hitch safety strap properly installed. A
dangling safety strap can contact spokes and damage rear wheel
or cause an ac ci dent re sult ing in se ri ous injury.
Hitch must seat properly into stays and not interfere with racks,
bags, or fi ttings. Inspect hitch and tongue frequently for damage or
loose fasteners. Interfering parts or damaged hitch can cause an
ac ci dent resulting in se ri ous injury.
A
B