3 using pre-ground coffee – Philips Grind & Brew Kaffeemaschine User Manual
Page 8

8
2
To open the filter basket holder, pull at its tab
on the right side of the coffeemaker.
3
Take a paper filter (type 1x4 or no. 4) and fold
the sealed edges to prevent tearing and folding.
Place the paper filter in the filter basket.
4
Put pre-ground coffee in the paper filter.
D
Note:
You can adjust the strength of the coffee to
your own personal taste. For a medium-strong
cup of coffee, use one measuring spoon
(approximately 6g) of ground coffee for each
cup (120ml). For stronger coffee, use
1.5 measuring spoons of ground coffee for
each cup of coffee.
5
Close the filter basket holder.
6
Put the jug in the appliance.
13
Press in the centre of the knob to confirm,
Then press in the centre of the knob again to
start the brewing process.
• The grinder grinds the required amount of
coffee beans.
14
Wait until the coffeemaker has stopped
brewing before you remove the jug.
D
Note:
After brewing, coffee drips from the filter
basket for several seconds.
15
Press the on/off button to switch off the
coffeemaker.
5.3 Using pre-ground coffee
If you want to use pre-ground coffee instead of
coffee beans, follow the steps below.
1
Open the water reservoir lid and fill the water
reservoir with the required amount of cold water.