Philips Grind & Brew Kaffeemaschine - Manual (Page 5)

5
5 Using the
coffeemaker
5.1 Filling the water reservoir
1
Open the water reservoir lid and fill the water
reservoir with the required amount of cold water.
When you open the water reservoir lid, there
are indications for 2 to 10 cups on the inside
of the appliance. You can use these indications
to determine how much water to put in the
water reservoir.
D Note:
Do not fill the water reservoir beyond the
10-cup indication.
5.2 Using coffee beans
We advise you to use light roasted coffee beans to
brew the perfect cup of coffee. If you like stronger
coffee you can use dark roasted espresso beans.
B Warning:
Always keep the water reservoir lid closed when
you fill the coffee bean container with coffee
beans. Otherwise coffee beans can fall into the
water reservoir and block up the water inlet.
5
Press the strength select button.
6
Turn the knob to choose the pre-ground
coffee setting.
• The pre-ground coffee icon lights up.
7
Press in the centre of the knob to confirm.
Then press in the centre of the knob again to
start the flushing process.
8
Let the coffeemaker operate until the flushing
process has been completed.
9
Press the on/off button to switch off the
coffeemaker.
10
Empty the jug.