Bosch FSM-2000 - Manual (Page 10)

10 en | Preparation Fire Monitoring System
F.01U.032.785 | A3 | 2007.05 Installation Guide Bosch Security Systems
1 Preparation
Parts Included
Requirement
FMS can be used with the following panels FPA-5000, UEZ 2000
und BZ 500. Your PC must fulfill the following requirements:
Prepare detector check plan and floor plan
Perform the following steps before installation:
– Store the detector check plan for each panel on the
computer. Detector check plans created with WinPara do
not include system addresses. Those you have to add
manually in the detector check plan.
– Store all floor plans in .dwf format in one folder. FMS
automatically sorts the floor plans alphabetically according
to file names. Determine the sequence of the floor plans
using letters.
– a_reception.dwf = 1st element in FMS
– b_office.dwf = 2nd element in FMS
Amount Components
1
Installation CD for FSM-2000
1 USB dongle
1 Disk containing the dongle.crp file
Hardware Description
COM port Max. 4 (one COM port per panel)
Interfaces USB/LPT
Drives CD-ROM, 3.5" disk drive
CPU min. 2 GHz
RAM 1024 MB (server), 512 MB (client)
Hard drive memory 10 GB
Network card 100 Mbit
Software Description
Operating system Windows 2000 SP4, Windows 2003 server,
Windows XP SP2 (not with Windows XP Home)
Internet Explorer Version 5.5 SP1 or 6.0
MSDE Version MSDE 2000 SP3a
Microsoft IIS Version 5.0 (Windows 2000, Windows XP)
Version 6.0 (Windows 2003 server)