Brother HL 4570CDWT - Manual (Page 84)

Control Panel
78
3
WLAN TCP/IP Boot Method Auto
*/Static/RARP/
BOOTP
/DHCP
Chooses the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)
*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)
*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)
*
1
Enter the Gateway address.
IP Boot Tries 0
/1/2/3*.../32767 Specifies the number of setting
trials when the Boot Method
allows automatic IP setting.
APIPA On
*/Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 Off
*/On Enables or Disables the IPv6
protocol.
Setup Wizard
Configures the wireless network
settings using the setup wizard.
WPS/AOSS
Configures the wireless network
settings using WPS or AOSS™
method.
WPS w/PIN Code
Configures the wireless network
settings using WPS with a PIN
code.
Network for HL-4570CDW(T) users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.