Brother HL 4570CDWT - Manual (Page 83)

Control Panel
77
3
Network for HL-4570CDW(T) users
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired LAN TCP/IP Boot Method Auto
*/Static/RARP/
BOOTP
/DHCP
Chooses the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)
*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)
*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)
*
1
Enter the Gateway address.
IP Boot Tries 0
/1/2/3*.../32767 Specifies the number of setting
trials when the Boot Method
allows automatic IP setting.
APIPA On
*/Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 Off
*/On Sets use of IPv6 protocol.
Ethernet Auto
*/100B-FD/100B-HD/
10B-FD
/10B-HD
Chooses Ethernet link mode.
Wired Status Active 100B-FD
/
Active 100B-HD
/
Active 10B-FD
/
Active 10B-HD
/
Inactive
/Wired OFF
Shows Ethernet link status.
MAC Address
Shows MAC address of the
machine.
Set to Default
Restores wired network settings of the internal print server to the factory default.
Wired Enable On
*/Off Chooses Ethernet link mode.
The factory settings are shown in Bold with an asterisk.