Brother HL 1650 User Manual
Page 87
CHAPTER 3 CONTROL PANEL
3-7
♦ Reprint the last JOB 3 times
☛
☛
☛
☛ 1.
Set the REPRINT menu ON with SETUP mode using the Control panel.
Note
If you print using this printer’s own driver, the settings for Job Spooling in the
printer driver will take priority over the settings made in the Control panel.
For more information,
see “Job Spooling” in Chapter 2.
☛
☛
☛
☛ 2.
Press the
Reprint
switch.
COPIES= 1
If you wait too long to continue the
switch panel operation, the display
exits the REPRINT menu
automatically.
Press
+
until the next screen is displayed as shown
below.
COPIES= 3
Press the
Set
or
Reprint
switch.
PRINTING
Note
If you want to reprint the data and have pressed the
Go
switch, the display
shows “PRESS SET TO PRINT”. Press
Set
to start the reprint job or
press the
Go
switch to cancel the reprint job.