Brother HL 1650 - Manual (Page 38)

1-28
☛ ☛ ☛ ☛ 3.
Open the Face up output tray.
Fig. 1-19
☛ ☛ ☛ ☛ 4.
Place envelopes in the Multi-purpose tray so they touch the back of the tray
and remain below the limit mark.
Fig. 1-20
✒ ✒ ✒ ✒
Note
When you place paper in the Multi-purpose tray, note the following:
•
If you will be printing on paper that weighs more than 135 g/m 2 (36 lbs),
use the face up output tray.
•
Insert the leading edge of the paper first and push it gently into the tray.
•
The top of the paper stack must be under the guides that are on both
sides of the tray. The maximum thickness is 11 mm (or 0.43 inch).
•
The printed side must be face up.