Brother 1840C - Manual (Page 64)

SETUP RECEIVE 4 - 3
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you’ll need to decide how long
the machine will signal you with its special pseudo/double-ring when
you have a voice call. (If it’s a fax call, the machine prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the machine rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on any telephone. (See Fax/Tel mode on page
A-15.)
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu/Set , 2 , 1 , 2 .
3
Press ▲ or ▼ to select how long the
machine will ring to alert you that you have a voice call (20, 30,
40 or 55 seconds for New Zealand and China).
Press Menu/Set .
4
Press Stop/Exit .
Even if the caller hangs up during the pseudo/double-ringing,
the machine will continue to ring for the set time.
2.F/T Ring Time