Brother 1840C - Manual (Page 37)

2 - 3 GETTING STARTED
Setting the Phone Line Type
If you are connecting the machine to a line that features a PABX
(PBX) or ADSL to send and receive faxes, it is also necessary to
change the Phone Line Type accordingly by completing the following
steps.
1
Press Menu/Set , 0 , 5 .
2
Press ▲ or ▼ to select PBX (For
Australia and New Zealand only), ADSL , ISDN (or Normal ).
Press Menu/Set .
3
Press Stop/Exit .
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your machine can be connected to most types of PABX.
The machine’s recall feature supports timed break recall only (TBR).
TBR will work with most PABX systems allowing you to gain access
to an outside line, or transfer calls to another extension. The feature
works when the
Hook key is pressed.
■
You can program a Hook keypress as part of a number
stored in a One-Touch or Speed-Dial location. When
programming the One-Touch or Speed-Dial number
(Menu/Set 2-3-1 or 2-3-2) press
Hook first (the screen
displays "!"), then enter the telephone number. If you do this,
you do not need to press
Hook each time before you dial
using a One-Touch or Speed-Dial location. (See Storing
numbers for easy dialling on page 5-1.)
■
For FAX-1840C, press Hook/Hold/Recall key while
holding down the Shift key.
5.Phone Line Set