Brother DCP-7040 - Manual (Page 47)

Safety and legal
41
A
Important Information for New Zealand
A
Important Safety Instructions
A
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 Unplug this product from the wall outlet before cleaning the outside of the machine and the
scanner glass. DO NOT use liquid or aerosol cleaners. Use a damp cloth for cleaning.
5 DO NOT place this product on an unstable surface, stand, or table. The product may fall,
causing serious damage to the product.
6 Slots and openings in the casing and the back or bottom are provided for ventilation; to ensure
reliable operation of the product and to protect it from overheating, these openings must not
be blocked or covered. The openings should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should never be placed near or over a radiator
or heater. This product should not be placed in a built-in installation unless proper ventilation
is provided.
7 This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact
a qualified electrician.
8 This product is equipped with a 3-wire earthed plug. This plug will fit into only an earthed
socket. This is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete socket. DO NOT defeat the purpose of an earthed plug.
9 DO NOT place anything on top of the power cord including this machine. DO NOT allow the
power cord to be stepped on.
10 DO NOT touch a document during printing.
11 Never push objects of any kind into this product through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
12 DO NOT attempt to service this product yourself, because opening or removing covers may
expose you to dangerous voltage points and/or other risks. Refer all servicing to service
personnel.
13 Unplug this product from the mains power, and refer servicing to qualified Service Personnel
under the following conditions:
„ If the power cord is damaged or frayed.
„ If liquid has been spilled into the product.
„ If the product has been exposed to rain or water.
„ If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions. Incorrect
adjustment of other controls may result in damage and will often require extensive work by
a qualified technician to restore the product to normal operation.