Black Box LRB500A - Manual (Page 30)

29
CHAPTER 3: Software Installation and Configuration
3. The Router Telnet Server Menu appears (see Figure 3-16).
Figure 3-16. Telnet Server Menu screen.
To use the menu, select the letter corresponding to the value you’d like to change.
Depending on the value you are changing, you are presented with either an open
field into which you may type new information or a list of options from which you
may select a value. Refer to the User Guide’s Telnet chapter for complete
descriptions of each option.
NOTE
After entering values, select “q” to return to the previous menu or to
quit. You must select Save and Restart Server to save your
configuration to the Router’s Flash memory.
Use the following information to configure your Router:
1. Define the Router IP Address, Router Subnet Mask, Router Name, and
Router Password by selecting the menu letter corresponding to each item.
Enter the values for the device on your local network in the field provided.
The WAN Ethernet MAC Addr. field displays the hardware address of the
board. You may change the MAC address if required by your ISP.