Black Box LRB500A - Manual (Page 22)

21
CHAPTER 3: Software Installation and Configuration
b.) Use RADIUS Server
Select this option if you would like your remote clients to be authenticated on a
RADIUS server. You must enter the following RADIUS Server Settings:
Figure 3-8. Enter RADIUS Server Settings.
• RADIUS Access Server IP Address: Enter the IP address of the RADIUS Access
Server.
• RADIUS Access Accounting Server IP Address: Enter the IP address of the
RADIUS Accounting Server.
• Secret: Enter your Secret RADIUS code or password.
• Secret Verification: To confirm your Secret code, re-enter your code or
password.
NOTE
In most cases, the RADIUS Access Server and the RADIUS Access
Accounting Server are the same server, so the IP address will be the
same.
Click Next>> and continue with Step 10 (page 23).