Philips Standmixer User Manual

Page 10

mixing without the stand

Insert the beaters or kneading hooks into the mixer (follow the

procedure as described above at point 3 in section ‘Mixing on the

stand’).

Put the plug in the wall socket.

Lower the beaters or kneading hooks into the ingredients and

switch on the mixer.

Press the turbo button to mix more quickly or to increase the speed

during heavy jobs, e.g. kneading yeast dough.

For the right quantities and times, see the table ‘Quantities and processing

times’.

If you want to stop mixing for a while, switch off the appliance and

put it (with the beaters or kneading hooks still attached) on its heel

until you continue (Fig. 10).

When you have finished mixing, set the control slide to 0 and

switch off the appliance. Then unplug the mixer.

Push the control slide forward to the eject position to release the

beaters or kneading hooks and remove them from the

mixer (Fig. 11).

cleaning

Always unplug the appliance before you clean it.
Never immerse the motor unit in water nor rinse it under the tap.
Caution: Do not use aggressive cleaning agents or abrasive cleaning

materials, such as scouring pads.

Clean the beaters, the kneading hooks and the spatula in warm

water with some washing up liquid or in the dishwasher.

Clean the bowl in warm water with some washing-up liquid.

EnglisH

4203_064_5811_2_DFU-Booklet_A6_v1.indd 10

25-05-11 11:22