Heading2 - connecting a desktop computer, Connecting a desktop computer – BOXLIGHT CD-450m User Manual
Page 20
12
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Connecting a Desktop Computer
1
Locate the cable that connects your monitor to your computer.
Unplug it from the computer.
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use the Mac adaptor
between the computer and the
CablePro. See “Optional
2
Plug the
end of the CablePro cable into the monitor con-
nector on your computer.
F
IGURE
9
Connecting the CablePro cable to a desktop computer
Do you want to display the image on your computer’s monitor as well
as on the projection screen?
NOTE: The projector must be
turned on to display the image on
your monitor.
1
Plug your monitor’s cable into the
connector on the
CablePro.
Do you want to play your computer’s audio on the projector?
1
Unplug the audio cable, if present, from your computer.
2
Plug either end of the CablePro audio cable into the audio
connector on your computer.
3
Plug the other end of the audio cable into the
connector
on the CablePro.