Blade ICE RACKSWITCH G8000 - Manual (Page 21)

BLADE OS 5.1 BBI Guide
BMD00139, November 2009 Chapter 3: Configuring the Switch „ 21
Using the BBI to Load Switch Software
You can use the Browser-Based Interface to load software onto the G8000. The software image to
load can reside in one of the following locations:
„ FTP server
„
TFTP server
„ Local computer
After you log onto the BBI, perform the following steps to load a software image:
1. Click the Configure context tab in the BLADE OS toolbar:
2. In the Navigation Window, select System > Config/Image Control.