Configuring the switch, Chapter 3: configuring the switch, Configuration steps – Blade ICE RACKSWITCH G8000 User Manual
Page 19
BMD00139, November 2009
19
C
HAPTER
3
Configuring the Switch
The Blade OS Browser-Based Interface (BBI) can be used to view and change switch configuration
parameters. The same configuration parameters that are available through the switch’s
command-line interface are present on the BBI configuration forms.
The following provides a basic outline for switch configuration. You should first be familiar with
configuration as covered in the Blade OS Command Reference manual.
Note –
You must be logged in using the administrator account in order to change switch
configuration settings.
Configuration Steps
Follow these basic steps for viewing or configuring switch parameters:
1.
Click the Configure context tab in the BLADE OS toolbar: