BenQ M555C - Manual (Page 70)

54 Mobile Internet
2 Proxy
Each proxy number represents the setting data of a WAP server (or
UPLINK). There are three different WAP servers available in your
phone. Here you can select a proxy number that represents the server
you want to activate as the default server. Your phone connects to the
default server during an Internet session.
You can also go the menu:
Settings --> Wap settings to select the
server you want to activate. See page 120.
WAP Proxy 1 => UPLINK1
WAP Proxy 2 => UPLINK2
WAP Proxy 3 => UPLINK3
3 Circuit Prompt
The Circuit Prompt is a message displayed before each circuit data
call is made. It reads “Circuit is down. Start data call?”. You may
enable and disable it by selecting ON or OFF.
4 Circuit Linger
The Circuit Linger is length of time that the phone waits before
terminating a circuit data call. You may set it to any length of time
between 30 and 9999 seconds.
5 Scroll Mode
You can select the scroll mode in Block or Smooth . In the Block
Scroll mode, as many of the words that fit on a line are displayed for a
few seconds then the next line is displayed, then the next and so on. In
the Smooth Scroll mode, the content scrolls smoothly on the display.
6 Scroll Speed
Adjusts the scroll speed to Fast , Medium , or Slow .