BenQ M555C - Manual (Page 144)

128 Menus
Adjusting the octave of a note
The default is the central octave. Press the appropriate
number of times to adjust the octave: "+" (higher octave), "-
"(lower octave):
Adding a sharp to a note
Press to add a note sharp "#". To remove a sharp from a
note, press again.
8
The sharp "#" is not available for the pitch notes e and b.
Adding a dot to a note
Press to add a dot " . ". The dot " . " represents half the
duration it follows. Press again to remove a dot.
Following are examples:
Steps for composing a chord melody
1.When you first enter the melody composer menu, select Add entry .
You will see three channels available for you to choose from. Each
channel is used to save one single tone that you have composed.
Scroll to highlight the channel you want and press ( SELECT )
to enter its composer screen.
2.To compose a tone:
Description Shown as
Central octave 1 beat So g1
Higher octave 1 beat So +g1
Lower octave 1 beat So -g1
Description Shown as
Central octave 3/8 beat So g/4.
Central octave 1 and 1/2 beat So g1.