beautypg.com

Bryant AIR CONDITIONERS 564A User Manual

Page 18

background image

START-UP CHECKLIST (REMOVE AND STORE IN JOB FILE)

I. PRELIMINARY INFORMATION

Model No. ...................................................................................................................................................................................................................

Serial No. ....................................................................................................................................................................................................................

Date .............................................................................................................................................................................................................................

Technician ...................................................................................................................................................................................................................

II. PRE-START-UP

___ Verify that all packing materials have been removed from unit

___ Verify that condensate connection is installed per installation instructions

___ Check all electrical connections and terminals for tightness

___ Check that indoor (evaporator) air filter is clean and in place

___ Verify that unit installation is level

___ Check fan wheel and propeller for location in housing and setscrew tightness

III. START-UP

Supply Voltage L1-L2 __________ L2-L3 _________ L3-L1 __________

Compressor Amps L1 __________ L2 _________ L3 __________

Indoor (Evaporator) Fan Amps __________

TEMPERATURE

Outdoor (Condenser) Air Temperature __________ DB

Return-Air Temperature __________ DB __________ WB

Cooling Supply Air __________ DB __________ WB

PRESSURES

Refrigerant Suction __________ psig

Suction Line Temp* __________

Refrigerant Discharge __________ psig

Discharge Temp† __________

___ Verify refrigerant charge using charging tables

* Measured at suction inlet to compressor
† Measured at liquid line leaving condenser

—18—