System setup menu, English – BenQ W500 User Manual
Page 39
39
Menus
English
System Setup menu
This menu contains items necessary for basic image setup.
Pan (Central)
Displays the Pan page for searching the details of the projected image by using the
directional arrow buttons on the projector or remote control after the image is
magnified. See
"Searching for details on the projected image" on page 33
for details.
PC & Component
YP
B
P
R
Tuning
The following settings are only available with a PC or DTV RGB signal selected.
•
H. Size (0): Adjusts the frequency of the sampling clock that captures the
input signal.
•
Phase (0): Adjusts the phase of the clock.
•
Auto: Adjusts the phase, and frequency automatically.
FUNCTION (default
setting / value)
DESCRIPTION
Language
(English)
Sets the language for the OSD menus. There are 17 languages for your choice:
English (default), French, German, Italian, Spanish, Russian, Traditional Chinese,
Simplified Chinese, Japanese, Korean, Swedish, Dutch, Turkish, Czech, Portuguese,
Thai, and Polish.
Splash Screen
(BenQ)
Allows you to select which logo screen will display during projector startup. Three
options are available: BenQ logo, Blue screen or My Screen.
My Screen
Captures and stores the projected image as My Screen. See
for details.
Projector Position
(Floor Front)
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. There are four settings for choice. Contact your dealer for the ceiling
mount bracket if you need to install the projector on a ceiling. See
for details.
Auto Off (Disable)
This function allows the projector to turn off automatically after your last button
press when no input signal is detected.
To set the Auto Off time, go to the System Setup > Auto Off menu and press eLeft
orfRight to set a time from 5 to 30 minutes in 5-minute increments.
The setting will remain the next time you turn on the projector.
Sleep Timer
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes
and 360 minutes.
Background
Color (Blue)
Allows you to choose the color of the background screen that will be displayed
when there is no input signal detected.
Menu Settings
•
Menu Display Time (10 sec): Sets the length of time the OSD will remain
active after your last button press. The range is from 5 to 30 seconds.
•
Menu Position (Center): Adjusts the horizontal and vertical position of the
OSD.
•
Menu Transparency (0): Adjusts the transparency level of the OSD.
Input Source
Selects the input signal. See
"Switching input signal" on page 25
for details.
Auto Source
Search (On)
Sets whether the projector searches automatically for input signals. See
automatic source search" on page 25
for details.