BenQ W500 - Manual (Page 38)

38 Menus
English
Picture--Advanced menu
The Picture--Advanced menu allows you to adjust the finer details of the projected image quality.
Display menu
Use this menu to set the way that the projector displays the picture.
FUNCTION (default
setting / value)
DESCRIPTION
Black Level (0
IRE)
See "Setting black level" on page 30 for details.
Clarity Control
See "Adjusting picture clarity" on page 31 for details.
Color Temp.
See "Selecting a color temperature" on page 31 for details.
Color Temp. Fine
Tuning
See "Setting a preferred color temperature" on page 31 for details.
Color
Management
See "Color management" on page 32 for details.
Dynamic IRIS (On)
Toggles Dynamic IRIS between On and Off.
Color Space
Transfer (Default)
When using certain European TV setup boxes found with YUV color encoding
system, press eLeft orfRight to select YUV as this will allow images to display
normally.
Blue Filter (Off)
See "Activating the blue filter" on page 32 for details.
FUNCTION (default
setting / value)
DESCRIPTION
Aspect Ratio
(Anamorphic)
There are a few aspect ratios that can be selected for different input signals. See "3.
Selecting the aspect ratio" on page 29 for details.
Keystone (0)
Corrects for trapezoidal distortion resulting from the angle of projection and
pincushion distortion of the image.
•
2D Keystone (0): Corrects any keystoning of the image. See "Correcting
two-dimensional keystone" on page 26 for details.
•
Pincushion Correction (0): Corrects any pincushion distortion of the
image. See
"Correcting pincushion and barrel distortion" on page 27 for
details.
Position (0)
Displays the position adjustment page. To move the projected image, use the
directional arrow buttons. The values shown on the lower position of the page
change with every button press you made until they reach their maximum or
minimum.
This function is only available with a D-sub (analog RGB) signal selected.
Overscan
Adjustment (0)
Slightly magnifies and stretches the picture to remove the less brighter image areas
commonly found towards the four edges.
Digital Zoom
(100%)
Magnifies the projected image. See "Searching for details on the projected image"
on page 33 for details.