BenQ W500 - Manual (Page 34)

34 Using the projector
English
Personalizing the projector menu display
The On Screen Display (OSD) menus can be set according to your preferences. These settings do not affect the
projection settings, operation, or performance.
• Language in the System Setup menu sets your familiar language for the on-screen menus.
• You can select the projector’s Background Color from black, blue or purple in the System Setup menu.
• Menu Display Time in the System Setup > Menu Settings menu sets the length of time the OSD will remain
active after the last button press.
• Menu Position in the System Setup > Menu Settings menu adjusts the OSD position on the screen.
Turning the power off
1. Press POWER on the projector or remote
control and a prompt message appears. Press
POWER a second time to turn the projector
off.
2. The Power indicator light flashes orange, the
lamp shuts down, and the fans continue to run
for approximately 140 seconds to cool down the
projector.
To protect the lamp, the projector will not
respond to any commands during the cooling process.
3. The Power indicator light is a steady orange once the cooling process
has finished and fans stop.
4. Disconnect the power cord from the wall socket.
POWER OFF
Press button again to
power off
Press any button to cancel