Blaupunkt CANBERRA 7 647 523 310 - Manual (Page 22)

51
DA
N
S
K
EN
GLISH
DEUT
SCH
FRAN
Ç
AIS
IT
ALIAN
O
NEDERLANDS
S
VENSKA
ESP
AÑOL
PORTUGUÊS
SD/MMC mode | CD changer mode
Interrupting playback (PAUSE)
Press the 3 button
=.
"PAUSE" appears on the display.
Cancelling pause
Press the 3 button
=.
Playback is continued.
CD-changer mode
Note:
Information about handling CDs, insert-
ing CDs and operating the CD changer
can be found in the operating instruc-
tions supplied with your CD changer.
Switching to CD-changer mode
Press the SRC button
? repeatedly
until the display shows "CDC/AUX-IN".
The device starts playing the fi rst CD that the
CD changer detects.
Selecting CDs
To move up or down to another CD,
press the or
5 button once or
several times.
Note:
The device will ignore empty CD slots in
the changer and slots containing invalid
CDs.
u
u
u
u
Selecting tracks
To move up or down to another track on the
current CD,
press the or
5 button once or sev-
eral times.
Fast seek tuning (audible)
To fast search backwards or forwards,
press and hold down the or button
5 for longer than two seconds.
Seek tuning continues as long as you hold
the button pressed.
Confi guring the display
Three options are available for the display in
CD changer mode:
Track number and playing time
Track number and time
CD number and track number
To switch between the different display
options,
press the DIS button
9.
Repeating individual tracks or
whole CDs (REPEAT)
You can repeatedly play the current track or
all tracks on the current CD.
Press the 4 RPT
= button repeatedly
until the desired function appears on the
display:
"RPT TRACK" (current track)
"RPT DISC"
(all tracks on the current CD)
"RPT OFF" (end repeat)
If the repeat function is active, the display
shows
RPT.
u
u
•
•
•
u
u
•
•
•
02_CanbSydMelbSD27_eng.indd 51 02_CanbSydMelbSD27_eng.indd 51 15.01.2007 14:59:59 Uhr 15.01.2007 14:59:59 Uhr