Blaupunkt CANBERRA 7 647 523 310 - Manual (Page 18)

47
DA
N
S
K
EN
GLISH
DEUT
SCH
FRAN
Ç
AIS
IT
ALIAN
O
NEDERLANDS
S
VENSKA
ESP
AÑOL
PORTUGUÊS
Traffi c information
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON stands for Enhanced Other
Network. Whenever a traffi c announcement
(TA) is broadcast, the system switches auto-
matically from a station that does not pro-
vide traffi c reports to the appropriate traffi c
information station within the broadcasting
network that does.
Once the traffi c report has been played, the
system will switch back to the programme
that you were listening to before.
In addition, the device offers the option of
receiving traffi c announcements even during
the operation of SD/MMC, CD changer and
external sources (AUX-IN). For this purpose,
activate the priority for the traffi c informa-
tion.
Switching traffi c information
priority on/off
Briefl y press the TRAF button
7.
The priority for traffi c announcements is ac-
tivated if the display shows the traffi c jam
symbol.
Notes:
You will hear a warning beep:
If you leave the reception area of a
traffi c information station that the
system is tuned into while listening
to an SD, a CD in the changer or AUX-
IN, and the subsequent automatic
search cannot fi nd a new traffi c
information station.
If you retune the radio from a traffi c
information station to a station that
does not broadcast traffi c informa-
tion.
u
•
•
If you hear the warning beep, you can
either switch off traffi c information
priority or tune into a station that
broadcasts traffi c information.
Skipping a traffi c announcement
"TRAFFIC" is displayed during a traffi c an-
nouncement. To cancel a traffi c announce-
ment without switching off the priority of
traffi c information:
During the traffi c announcement, press
the
TRAF button
7 once.
The previously active audio source is played
again. If a traffi c announcement is broadcast
again, the device automatically switches it
through again.
Setting the volume for traffi c
announcements
Press the M/OK button
>.
The display shows "MENU".
Press the or button
5 repeatedly
until "TA VOLUME" appears on the dis-
play.
Press the M/OK button
> to display
the submenu.
"TA VOL" and the currently set value are
displayed.
Set the desired volume using the or
button
5.
When you have fi nished making your chang-
es,
press the M/OK button
>.
To exit the menu,
press the ESC button
6 or wait approx.
8 seconds.
u
u
u
u
u
u
u
02_CanbSydMelbSD27_eng.indd 47 02_CanbSydMelbSD27_eng.indd 47 15.01.2007 14:59:58 Uhr 15.01.2007 14:59:58 Uhr