Buffalo Technology WMR-G54 - Manual (Page 8)

II. Quick Setup
The Quick Setup will guide you through the steps necessary to
configure your DSL Router.
III. Configure WAN (DSL) Connectivity
1. Click the Advanced Setup tab on the left frame.
2. Click the WAN tab on the left frame. A WAN Setup page
will appear on the right frame. Click the Add button.
3. The ATM PVC Configuration page will appear. Enter the
appropriate VPI and VCI values. Select appropriate
Service Category. Click Next.
PVC is identified by the VPI (Virtual Path Identifier) and VCI
(Virtual Channel Identifier). Consult your ISP to get the numbers.
The valid range for the VPI number is from 0 to 255 (The default
value is 0.). The valid range for the VCI number is from 32 to
65535 (The default value is 35).
There are five service categories provided: UBR Without PCR,
8