Buffalo Technology WMR-G54 - Manual (Page 6)

For Windows 2000/Windows XP
1. Right-click on My Network Places icon on the desktop and
then click Properties in menu.
2. Double-click Local Area Connection icon and then
click Properties button.
3. Scroll down to highlight TCP/IP (your network card) and
then click Properties button.
4. Check the radio button for Specify an IP address. In the
IP address box, type the assigned IP address 192.168.1.x
(x is any number between 2 and 254).
5. In the Subnet mask box, type the subnet mask
255.255.255.0.
6. In the default gateway box, type the default gateway IP
address. For example, 192.168.1.1.
7. Click OK button in the TCP/IP Properties window to
complete the PC configuration, and click Close or the OK
button to close the Network window.
Configuring with Web Browser
Before you begin
Make sure that you get the setup information you need (for
example, VPI, VCI, and type of encapsulation) from your
6