Buffalo Technology WMR-G54 - Manual (Page 18)

IV. Configure Wireless Connectivity
1. Click the Wireless tab on the left frame. A Wireless - Basic
page will appear on the right frame. Check the box Enable
Wireless.
2. Check the box Hide Access Point and then your
WMR-G54 will not respond when a ping is sent by any user
on the Internet. This feature is helpful if you do not want to
let other Internet users to check the status of your
WMR-G54. However, the station will not be able to find your
WMR-G54.
3. Enter a desired name in SSID field. This SSID is a network
name that identifies the wireless devices in the network.
The default value is WMR-G54. All workstations and
access points must use the same SSID to be able to
communicate with one another. The SSID is a 32-character
field, and the value is case sensitive.
4. Click the Apply button.
18