Philips Aspirateur-robot - Manual (Page 26)

26
4
To remove the roller brush, lift the left-hand
side out of the robot (1) and then pull the
right-hand side out of the bearing block (2).
D Note:
When you remove the roller brush, make sure
you do not lose the loose ring on one side of the
roller brush. This ring is intentionally loose to
enable easier cleaning.
5
Remove fluff, hairs and other dirt from
the roller brush with the comb end of the
cleaning tool or with your fingers.
D Note:
You can find the cleaning tool on the inside of the
dust container compartment cover (see section
‘Emptying the dust container’ in this chapter).
7.5 Cleaning the roller brush
For the best results, clean the roller brush
when hair is entangled round it.
1
Turn the robot upside down on the floor or
on a table.
2
Press the latch hooks on both sides of the
roller brush retainer towards each other to
unlock the retainer.
3
Lift the roller brush retainer out of the robot.