Philips Aspirateur-robot - Manual (Page 19)

19
EN
g
LIS
h
6.2.4 CARPET cleaning mode
• Use the CARPET cleaning mode to clean
rooms or areas with wall-to-wall carpeting
with a pile depth of up to 20mm. If you have
a thick wall-to-wall carpet, first try the AUTO
cleaning mode (see section ‘AUTO cleaning
mode’ above). If the robot moves back and
forth on the same spot or fails to keep a
straight line, use the CARPET cleaning mode
D Note:
If you use the CARPET cleaning mode too often,
it shortens the life of the battery. Only use the
CARPET cleaning mode on wall-to-wall carpets if
the AUTO cleaning mode does not do the job.
• In the CARPET cleaning mode, the homeRun
cleans your floors in a mixed pattern of
straight and crisscross movements.
• The homeRun cleans with the TURBO function
on by default to increase its cleaning power.
• When it has finished cleaning, the text ‘bASE’
appears on the display and the homeRun
returns to the base station.
D Note:
If you let the homeRun clean without the base
station, it stops cleaning when it has finished
cleaning or when its rechargeable battery runs low.
• When it has finished cleaning the area, the
text ‘bASE’ appears on the display and the
homeRun returns to its starting point.
6.2.3 CLIMB cleaning mode
• Use the CLIMB cleaning mode to clean
floors with thicker rugs and with objects
the homeRun cannot climb over in AUTO
cleaning mode. In CLIMB cleaning mode the
homeRun is able to climb onto most low-pile
rugs (1) and can cross objects with a height of
up to 15mm (2).
• The HomeRun cleans your floors in parallel
lines to make sure your floors are cleaned in
the most efficient way.
• When it has finished cleaning, the text ‘ bASE’
appears on the display and the homeRun
returns to its base station.
• If the rechargeable battery runs low
during cleaning, the homeRun returns
automatically to the base station to charge.
After charging, it goes back to the place where
it left off and continues cleaning.
D Note:
If you did not start cleaning from the base station,
the robot returns to its starting point when it has
finished cleaning or when its rechargeable battery
runs low.