BT 3010 Executive - Manual (Page 52)

Diverse 3010 Executive – Edition 4 – 22 November ’00 - 3509
48
To insert an access code
This means the access code
will be automatically dialled
before any number stored in
the Caller Display calls list.
Press the INT button.
Press the SET button.
Press the 4 button then press
the 0 button.
Press the OK button.
Enter the base station PIN
(original setting
0000 ).
Press the OK button.
Enter the access code for your
switchboard (this can be up to
3 digits).
Press the OK button to confirm.
Press the RED PHONE button
to return to standby.
Note
• You can store RCL,
✱
, and # as
well as the digit keys 0-9.
• You may find it useful to enter 144
(for BT Chargecard access) as one
of the access codes, together with
an access pause of six seconds – see
‘Setting the access pause’ on the
next page.
Note
It is possible to set TONE with
adjustable TBR, however, this is not
recommended for the UK network.
INT
SET
4
GHI
0
OK
OK
OK
KEYPAD
KEYPAD
WARNING
If Call barring is set you can only dial:
9 112 or R 112 in an emergency and
not
9 999 or R 999. See page 31.
If Call barring is set you can only dial
9 112, R112 or R999 in an
emergency. Not
9 999. See page 31.
To set TONE dialling with
time break recall
Press the INT button.
Press the SET button.
Press the 3 button then press
the 5 button.
Press the OK button.
Enter the current base station
PIN (original setting
0000 ).
Press the OK button.
Press the 2 button to set tone
dialling with time break recall.
Press the OK button.
Press the RED PHONE button
to return to standby.
INT
SET
3
DEF
5
JKL
2
ABC
OK
OK
OK
KEYPAD
S
WIT
CHBO
ARD
Diverse 3010 Executive 22/3/01 12:03 pm Page 48