BT 3010 Executive - Manual (Page 35)

Diverse 3010 Executive – Edition 4 – 22 November ’00 - 3509
31
01 1
_
_
_
Blank (or previously
stored numbers.
Memory location
(1-5).
Function number
entered previously.
Call Restriction
Call barring and
Call enabling
You can bar specific numbers, e.g. all
international calls by barring the
international dial code 00.
Enabling
You can also specifically set a handset
so that it can only dial certain numbers.
Call barring affects all handsets
registered to the base station.
If a barred number is dialled, the phone
hangs up automatically and the barred
number is displayed.
You can store up to five numbers as
either barred or specifically enabled
phone numbers. These can be pre-fix
numbers, eg 00 for all international
calls. Incoming calls are not affected.
Note
Emergency Services 999 calls can be
made at all times.
Note
From switchboards you can dial:
– The access code (eg
9) followed by
112 or R 112.
WARNING
You cannot dial 9 999 or R 999 from
behind a switchboard when call barring
is set.
Directory for barred/enabled
numbers
To: Bar numbers.
Enable handsets to call only
specified numbers.
Create a memory list.
Press the INT button.
Press the SET button.
Press the 0 button then press
the 1 button.
Press the OK button.
Enter the base station PIN
(original setting
0000 ).
Press the OK button. Display
shows the first location.
SET
0
1
KEYPAD
INT
OK
OK
SECURITY
To dial your additional
emergency numbers
Press the GREEN PHONE
button to obtain dial tone.
Dial the additional emergency
number. KEYPAD
Diverse 3010 Executive 22/3/01 12:03 pm Page 31