BT 3010 Executive - Manual (Page 10)

Setting up
Diverse 3010 Executive – Edition 4 – 22 November ’00 - 3509
6
Red socket
Follow these steps to get
your Diverse 3010
Executive ready for use
Note
Plan where you will put your Diverse
3010 Executive. It should be within
two metres of a power socket and the
phone socket.
1 Connect the power cable
Plug the power cable into the power
socket on the underside of your Diverse
3010 Executive. The power cable
connector is coloured red. Please take
care that the telephone cord and power
cable plugs are connected to the correct
socket as incorrect placement could
damage the base station.
2 Plug the 3 pin adaptor
into a mains power socket
and switch on
Note
Use only the power adaptor
C39 280-Z4-C174/..–C67 with your
Diverse 3010 Executive.
SETTING
UP
Your handset is already
“registered” to the Diverse
3010 Executive base station.
WARNING
It is recommended that the telephone
line cord is not connected until the
handset is fully charged. This will
prevent the risk of the phone being
answered prior to the batteries being
fully charged and therefore not
achieving their optimum capacity.
Diverse 3010 Executive 22/3/01 12:02 pm Page 6