BT 3010 Executive User Manual

Page 46

Registering a new Diverse
3000 handset with the
base station

Diverse 3010 Executive – Edition 4 – 22 November ’00 - 3509

Don’t forget that your Diverse 3010
Executive handset is already registered.

Up to six handsets can be registered
and operated from the Diverse 3010
Executive base station. The system
allows you to make internal intercom
calls between two handsets while a third
is making an external call.

Each additional handset you purchase
must be registered at the base station.

The example below shows how to register
a Diverse 3000 Executive or 3010 Micro
handset to the Diverse 3010 Executive
base. For registering Diverse 3000 Classic
handsets refer to the relevant user guide.

To register your Diverse 3000
handset to a base station

Press the MENU button.

Press the DOWN arrow to
highlight

Base Settings

Press the OK button.

Press the DOWN arrow to
highlight the base you wish to
register to.

Press the MORE OPTIONS
button.

Press the DOWN arrow to
highlight

Press the OK button.

Enter the base station PIN
number (original setting

0000

Press the OK button. Display
shows

Regstr.Procedure Base

(e.g.)

(flashes).

At the base station:

Press and hold down the PAGE
button (for about 10 seconds)
until you hear a tone.

The handset will display the
available handset numbers e.g.

NB. There is a small delay before
these numbers are displayed
on the screen.

Select and enter one of these
numbers. This is now the
handset’s internal number and
is registered with the base
station, e.g.

Base 2

stops flashing.

Note

You now have up to 1 minute to
register the handset, during which
the beeps will continue.

––

- - ––

–

PIN

KEYPAD

REGIS

TERING

Diverse 3010 Executive 22/3/01 12:03 pm Page 42