BT 3010 Executive - Manual (Page 51)

Diverse 3010 Executive – Edition 4 – 22 November ’00 - 3509
47
Using your Diverse
3010 Executive with
a switchboard
Your Diverse 3010 Executive can be
connected to compatible switchboards.
If in doubt please contact your
switchboard supplier.
Setting to Tone or Pulse
dialling
Your Diverse 3010 Executive is preset
to TONE dialling – where you hear a
tone beep each time you dial a number.
Tone dialling is suitable for all modern
digital exchanges and switchboards.
So you will only need to use this if your
switchboard uses pulse dialling. If you
cannot make a call with TONE dialling,
you may need to switch to PULSE dialling.
Press the OK button.
Press the 4 button to set pulse
dialling with earth recall.
Press the OK button to confirm.
Press the RED PHONE button
to return to standby.
To set PULSE dialling with
earth recall
Press the INT button.
Press the SET button.
Press the 3 button then press
the 5 button.
Press the OK button.
Enter the current base station
PIN (original setting
0000 ).
To set to TONE dialling with
earth recall
Press the INT button.
Press the SET button.
Press the 3 button then press
the 5 button.
Press the OK button.
Enter the current base station
PIN (original setting
0000 ).
Press the OK button.
Press the 3 button to set Tone
with fixed flash time.
Press the 1 button to set tone
dialling with earth recall.
Press the OK button to confirm.
Press the RED PHONE button
to return to standby.
INT
SET
3
DEF
5
JKL
OK
KEYPAD
3
DEF
5
JKL
3
DEF
1
OK
KEYPAD
OK
OK
4
GHI
OK
OK
INT
SET
S
WIT
CHBO
ARD
Diverse 3010 Executive 22/3/01 12:03 pm Page 47