Bay Technical Associates 529H User Manual
Page 33
28
You may now reconfigure Port 3 by selecting the appropriate option
(1-6) from the menu. For example, to change the baud rate to 2400
baud, send character "
2
" (Set baud rate). The multiport will respond
with:
1 For 110
2 For 135
3 For 300
4 For 600
5 For 1200
6 For 2400
7 For 4800
8 For 9600
Enter request:
Enter "
6
" for 2400 baud rate, and the multiport will respond with the
reconfigured status of the port and the menu of options:
•••••••••••••••••••••••••••••••••••••••••
• Port • Baud • Word • Stop •Parity•Xon/•
• • Rate • Size • Bits • •Xoff•
•••••••••••••••••••••••••••••••••••••••••
• 3 • 2400 • 8 • 1 • None • Off•
•••••••••••••••••••••••••••••••••••••••••
Exit/Save.........1 Set stop bits......4
Set baud rate.....2 Set parity.........5
Set word size.....3 Set Xon/Xoff.......6
Enter request:
If there are no other changes for this port, enter "
1
" (Exit/Save), and
the multiport will respond with:
Save Changes Permanently? (Y/N):
If you answer "
Y
" (yes), the new configuration for that port will be
stored permanently in non-volatile memory and the multiport will
subsequently power-up at the new configuration. If you answer "
N
"
(no), the new configuration will be stored in RAM and on the next
power-up, the multiport will revert to the previous configuration.