BT 5500 - Manual (Page 58)

58
If you experience any problems, please call the Helpline on 0800 145 6789* or email [email protected]
Using additional handsets
Handset external display
When an internal call is received, the display
shows Internal Call Handset X (where X is the
calling handset) and the handset number.
Internal calls
Call another handset
If you have more than one handset registered to the base, you can make
internal calls between two handsets.
1. Press then the number (1-5) of the handset you want to call.
2. Press ok to dial.
Transfer a call
You can transfer an external call to another handset registered to the base.
During your call:
1. Press then the handset number (1-5) you want.
2. Press ok to dial or press enD to cancel the calls request and return to the caller.
3. When the other handset answers you can announce the caller.
4. Press to complete the transfer or to switch back and forth between
both callers.
3-Way conference call
You can hold a 3-way conference call between 2 internal callers and
1 external caller.
During a call to an external caller:
1. Press then the handset number (1-5) you want.
2. Press ok to dial.
3. When the other handset answers you can announce the caller.
4. Press Join to begin the conference call. Display shows conference call.
5. Press
to hang up.
If the other handset does not answer, press enD
to return to your original caller.