BT 5500 - Manual (Page 27)

If you experience any problems, please call the Helpline on 0800 145 6789* or email [email protected]
27
Select from 5 base ringtones.
You will hear a sample ring for each one you
highlight (if the ringer is not switched off).
Base ringtone
1. Press menU, scroll to settings and press select.
2. Scroll to set Base and press select.
3. ringtone is highlighted. Press select.
4. Scroll
or
to highlight the ringtone you want.
5. Press select to confirm.
6. Press Back to return to the previous menu level.
Base ringer volume
1. Press menU, scroll to settings and press select.
2. Scroll to set Base and press select.
3. Scroll to ringer volUme and press select.
4. Press
or
to display the volume level you want.
Press select to confirm.
5. Press Back to return to the previous menu level.
Dialling mode
1. Press menU, scroll to settings and press select.
2. Scroll to set Base and press select.
3. Scroll to Dialling moDe and press select.
4. Press
or
to highlight PUlse or tone then press select
to confirm.
5. Press Back to return to the previous menu level.
Base settings
The base has 5 ringer volume settings plus Off.
The default setting is level 5.
Your BT Synergy is pre-set to Tone dialling. You
should not normally need to change this setting.
The dial mode options are Tone (Time Break/
Earth) or Pulse (Earth).