BT 5500 - Manual (Page 22)

22
If you experience any problems, please call the Helpline on 0800 145 6789* or email [email protected]
Using the phone
While SIM copying is taking place do not
replace the handset on the base as this will
stop the transfer.
However, if an incoming call is received, the
copying process is cancelled so that the call can
be taken.
The PIN number will be displayed as asterisks for
security reasons.
If the memory becomes full during copying from
a SIM , the display shows memorY fUll not
all coPieD.
Most SIM cards are supported, but if the SIM
Card format is not compatible, the display shows
sim format not sUPPorteD.
When copying from a SIM only the first
12 characters of each name are copied and
the first 24 digits in a number are copied.
If an entry with a duplicate number is found,
the entry will not be copied.
Please insert sim carD will be displayed if
you have not already inserted a SIM card into
the base.
Copy an entry to a SIM card
1. Insert the SIM card into the SIM READER slot on the side of the base.
2. Press to open the phonebook list then press oPtions.
3. Scroll to coPY entrY and press select.
4. Scroll to to sim and press select.
5. If requested, enter your SIM PIN then press ok.
6. Display shows Please wait...x% as it copies entries from the SIM.
When completed the display shows coPieD.
7. Press Back to return to the previous menu level.
Copy all entries to or from a SIM card
1. Insert the SIM card into the SIM READER slot on the side of the base.
2. Press names.
3. Scroll
to coPY PHoneBook and press select.
4. Scroll to either from sim or to sim and press select.
5. If requested, enter your SIM PIN then press ok.
6. Display shows coPYing and the name of each entry. When completed the
display shows the number of entries.
7. Press Back to return to the previous menu level.
Important
Make sure your numbers are stored on the SIM
card and not just on the mobile itself, otherwise
copying will not work.