Boss Audio Systems ME-50B - Manual (Page 15)

15
Using the Effects
ANALOG DLY/0-400 ms DLY/300-1400 ms DLY
ANALOG DLY:
This gives a mild analog delay sound. The delay time
can be set within the range of 100 ms to 500 ms.
0-400 ms DLY:
Delay sound of 0 to 400 ms delay time.
300-1400 ms DLY:
Delay sound of 300 to 1400 ms delay time.
TIME/RATE knob
Adjusts the delay time.
FEEDBACK/DEPTH knob
Adjusts the amount of feedback (number of repeats).
Turning the knob to the right increases the number of
times the sound repeats.
E.LEVEL/RESONANCE knob
Adjusts the volume of the delay sound.
PHASER
By adding varied-phase portions to the direct sound,
adds a twisting “warp” effect to the sound.
TIME/RATE knob
Adjusts the rate of phaser effect.
FEEDBACK/DEPTH knob
Adjusts the depth of phaser effect.
E.LEVEL/RESONANCE Knob
Adjusts the amount of resonance.
FLANGER
Adds a undulation like that of a jet ascending or
descending.
TIME/RATE knob
Adjusts the rate of flanging effect.
FEEDBACK/DEPTH knob
Adjusts the depth of flanging effect.
E.LEVEL/RESONANCE knob
Adjusts the amount of resonance.
CHORUS
This is a stereo chorus effect that adds different chorus
sounds to L and R.
TIME/RATE knob
Adjusts the rate of modulation.
FEEDBACK/DEPTH knob
Adjusts the depth of modulation.
E.LEVEL/RESONANCE knob
Adjusts the volume of the chorus sound.
CHO+DELAY
An effect combining chorus and delay.
The delay time can be set within the range of 100 ms to
800 ms.
* The chorus setting is fixed.
TIME/RATE knob
Adjusts the delay time.
FEEDBACK/DEPTH knob
Adjusts the amount of feedback (number of repeats).
Turning the knob to the right increases the number of
times the sound repeats.
E.LEVEL/RESONANCE knob
Adjusts the volume of the delay sound.
CHO+REVERB
An effect combining chorus and reverb.
* The chorus setting is fixed.
TIME/RATE knob
Adjusts the reverb time.
FEEDBACK/DEPTH knob
Adjusts the tonal quality of the reverb sound. Turn the
knob to the right for a brighter sound.
E.LEVEL/RESONANCE knob
Adjusts the volume of the reverb sound.
REVERB
This effect adds reverberation to the sound.
TIME/RATE knob
Adjusts the reverb time.
FEEDBACK/DEPTH knob
Adjusts the tonal quality of the reverb sound. Turn the
knob to the right for a brighter sound.
E.LEVEL/RESONANCE knob
Adjusts the volume of the reverb sound.