Boss Audio Systems ME-50B - Manual (Page 11)

11
Using the Effects
DEFRETTER
This effect allows you to use a conventional bass to
simulate a fretless bass.
SENS/BOTTOM knob
Adjusts the amount of defretter effect applied in
response to the input sound.
DEPTH/TONE knob
Adjusts the tone. Turn the knob to the left for a milder
sound, or to the right for a sharper sound.
RESONANCE/E.LEVEL knob
Adjusts the volume of the defretter sound.
ENHANCER
This is an effect that clarifies the contour of the input
sound by emphasizing the sound following changes in
the input level.
SENS/BOTTOM knob
This adjusts the Enhancer sensitivity. The more the knob
is turned to the right, the more softly you can play and
still have the effect applied.
DEPTH/TONE knob
Adjusts the frequency at which the enhancer will begin
to be applied. The effect is applied at higher frequencies
the more the knob is turned to the right.
RESONANCE/E.LEVEL knob
Adjusts the amount of enhanced sound added to the
mix.
BOTTOM BOOST/MID SHAPE/HOLLOW
Alters the special characteristics of the bass sound.
BOTTOM BOOST:
Creates a tone with a boosted low end.
MID SHAPE:
Creates a tone with the midrange cut back.
HOLLOW:
Adds body resonance to create a tone resembling that of
an acoustic-electric bass.
SENS/BOTTOM knob
Adjusts the tone of the lower range.
DEPTH/TONE knob
Adjusts the tone of the upper range.
RESONANCE/E.LEVEL knob
Adjusts the volume.