Brother 1810 - Manual (Page 63)

59
FRAME FUNCTION
With the Frame function, you can choose from various frames and highlights to design a
more decorative or emphasized label.
The following Frame settings are available:
OFF, ROUND, CANDY, POINTING, NAMEPLATE, DOT
The default frame setting is OFF; however, other settings are also available. When any
setting other than OFF is selected, the Frame indicator on the right side of the display
lights up.
Refer to
Reference at the end of this section for samples of the available settings.
To change the frame setting:
1 While holding down , press once, and keep held down to dis-
play the current frame setting.
2 While still holding down , continue pressing until the desired frame
setting is displayed.
☞
The Frame indicator lights up when any setting other than OFF is selected.
3 Release to apply the selected frame setting to the entire text.
EXAMPLE
To select the CANDY frame setting:
1 While holding down ,
press once, and keep
held down.
2 While still holding down ,
continue pressing until
CANDY is displayed.
3 Release .
Frame
Frame
O F F
F R A M E Alt
Caps Frame
Underline
Length
Auto
Font 1 Font 2
Frame
C A N D Y
F R A M E Alt
Caps Frame
Underline
Length
Auto
Font 1 Font 2
Frame