Brother 1810 - Manual (Page 50)

46
3 Press .
4 Press .
5 Push down on the tape cutter lever to cut the stamp stencil film.
To affix a stamp:
6 Remove the stamp frame from around the stamp film holder ink pad, one
side at a time, then remove the protective seal covering the ink pad and the
backing paper from the stamp stencil film.
7 With the glossy side of the stamp stencil film upward, align one of its ends
with the slit on the side of the stamp film holder.
2: 1 2 3 4 M a i n S _
1: J . S m i t h Alt
Caps Frame
Underline
Length
Auto
Font 1 Font 2
1 / 1
C O P I E S Alt
Caps Frame
Underline
Length
Auto
Font 1 Font 2
Mirror
Tape end
Glossy side
Slit