Belkin F5D7231-4P - Manual (Page 5)

2
Introduction Introduction
3
Introduction
2
1
3
4
5
6
7
8
9
10
11
12
se
ct
io
n
13
2. Avoid Obstacles and Interference
Avoid placing your Wireless Router or Access Point near
devices that may emit radio “noise,” such as microwave ovens.
Dense objects that can inhibit Wireless communication include:
• Refrigerators
• Washers and/or dryers
• Metal cabinets
• Large aquariums
• Metallic-based UV tinted windows
If your wireless signal seems weak in some spots, make sure that
objects such as these are not blocking the signal’s path (between
your computers and Wireless Router or Access Point).
3. Cordless Phones
If the performance of your wireless network is impaired after
attending to the above issues, and you have a cordless phone:
• Try moving cordless phones away from Wireless Routers or
Access Points and your wireless-enabled computers
• Unplug and remove the battery from any cordless phone
that operate on the 2.4GHz band (check manufacturers
information). If this fixes the problem, your phone may
be interfering.
• If your phone supports channel selection, change the
channel on the phone to the furthest channel from your
wireless network. For example, change the phone to channel 1
and move your Wireless Router or Access Point to channel 11.
See your phone’s user manual for detailed instructions.
• If necessary, consider switching to a 900MHz or 5GHz
cordless phone.
4. Choose the “quietest” channel for your wireless network
In locations where homes or offices are close together, such as
apartment buildings or office complexes, there may be wireless
networks nearby that can conflict with yours.
Use the Site Survey capabilities found in the Wireless LAN Utility
of your wireless adapter to locate any other wireless networks that
are available (see your wireless adapter’s manual), and move your
Wireless Router (or Access Point) and computers to a channel as
far away from other networks as possible.