BT SYNERGY 4500 - Manual (Page 52)

52
If you experience any problems, please call the Helpline on 0870 605 8047
Make sure the volume on the base
is set to an audible level, see
page 42.
You can adjust the call screening
volume using the
or
buttons.
Menu
Menu
2. You will hear, “Please speak after the tone. To end
recording press square”.
3. After the beep, speak your memo clearly into the
handset. While recording, the display will show To End
Recording Press# .
4. Press to end recording.
5. The display will return to the standby screen. Your memo
is now stored and can be played back in the same way as
incoming messages.
Call screening
When the answering machine is on and takes a call, you
can use the loudspeaker to listen to the caller leaving a
message. You can then identify the caller and decide
whether to take the call in person.
To screen a call via the base
1. Press , or lift the handset off the base, if you want to
interrupt and speak to the caller. Recording will stop
automatically.
Answering machine
Synergy 4500 – Issue 3 – Edition 1 – 21.08.06 – 7771